GIULIANO SANTAGATA & C SAS
CT 3274 stainless steel submersible electric pump
CT 3274 stainless steel submersible electric pump
Tax calculated at checkout
Couldn't load pickup availability
It can be used to lift dirty water, even with small diameter solid impurities (max 15 mm), to draw clean water and rainwater from wells, pits, pits, cellars even with fixed installation. It is also suitable for irrigation of various plants by flowing.
It is not suitable for lifting sewage water (sewer).
Use the handle to carry and lift the pump.
Fitting a quick-release fitting at the right point makes cleaning and maintenance easier.
The pit must be large enough to avoid too high a number of starts, and in any case not higher than 20 evenly distributed times.
In the event of temporary use, it is recommended to use a flexible hose which is connected to the pump via a hose connector.
To immerse the pump in water, use a rope that is fixed to the handle.
The maximum diving depth can be 5m.
Construction:
The pump consists of a pumping body with motor cover in plastic material, impeller in NORYL (material resistant to cavitation), and a single-phase asynchronous motor with body in aluminum and shaft in stainless steel, sealed with a modern axial seal with graphite sliding ring- ceramic-NBR.
The pump may only be used with an earthed socket!
Technical parameters: Absorbed power: 600 W Nominal power: 450 WV/Hz: 230/50 Max flow rate: 220 l/min Max head: 7 m Delivery port diameter: 1”1/4 F gas Electric cable: H07 RNF 3x0.75 mm2 Cable length: 10 m Service: S1 continuous Max liquid temperature: 35 °C
Shipping and Returns
Shipping and Returns
The product will be delivered to the address indicated at the time of order confirmation.
The delivery times expressed on the site are indicative and depend on the products chosen and can be modified at any time and are not to be considered binding in any way, even if our firm intention is to process each order as quickly as possible, generally 48h.
We remind you that in the same order it is possible to insert different products but in the case of the presence of multiple different products it could be required a few more days for the evasion.
Shipments are made with GLS Express Courier within 24/48 hours (islands excluded); for the islands the estimated time is 48/72 hours.
Upon delivery of the goods, the Customer is required to check:
- that the number of packages delivered corresponds to what is indicated in the transport document.
- that the packaging is intact and not altered even in the closing tapes.
Shipping takes place within 24/48 hours of receipt of payment. Any possible delay by the express courier is not to be charged to Giuliano Santagata & C. sas.
Both the bank transfer and the money order take 3-5 days to arrive. The products will be shipped only when we receive the real credit on the c/c.
In the event of tampering and/or breakage, the Customer must immediately dispute the shipment and/or delivery by writing "GOODS CONTROL RESERVE" on the signed copy of the delivery document to be returned to the courier or other operator.
The Customer is required to report any damage within 10 (ten) days of receipt of the goods, by registered mail in advance by fax or by mail to the following addresses:
- celestino21489@tiscali.it
